Flexible Nylon Tubing – N Series is formulated from abrasion-resistant, heat, and light-stabilized nylon that is capable of operating at 200°F. It exhibits low-level water absorption and is chemically resistant.
|Wall Thickness (inch):||0.025 inch|
|Wall Thickness (mm):||0.635 mm|
|Outer Diameter (inch):||3/16 inch|
|Outer Diameter (mm):||4.8 mm|
|Inner Diameter (inch):||0.138 inch|
|Inner Diameter (mm):||3.5 mm|
|Pressure Range:||250 – 499 psi (17 to 34 bar)|
|Max Pressure:||500 psi (34.5 bar)|
|Minimum Burst Pressure
(psi at 73°F):
|Minimum Bend Radius:||0.63 inch|
|Temperature Range:||-65°F to +200°F (-54°C to +93°C)|
|Length per Package:||250 ft|
|Parker Group:||Fluid Connector|
|Compatible Fitting:||Compression, Compress-Align, Hi-Duty, Fast & Tite, Flow Controls, Prestolok, TrueSeal, NTA, Transmission|
WARNING: This product can expose you to chemicals including Nickel and Nickel Compounds which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries, and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety, and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.